Assessment Details and Submission Guidelines
Trimester T1 2020
Unit Code BN202
Unit Title Internetworking Technologies
Assessment Type Type A: Individual submission and demonstration
Assessment
Title Assignment 1 - Network requirement analysis and plan
Purpose of the assessment
(with ULO
Mapping) Main objective of this assignment is to enable student to understand networking devices, gather requirements for a given business case study and plan a network design.
After successful completion of this assignment, students should be able to:
b) Explain human factors in achieving business and technical goals through planning and design.
c) Develop architectural internetworking design for the business and application domains.
Weight Part A: 5% and Part B: 10%
Total Marks 65
Word limit NA
Due Date Part A Due Date 11:55PM 10th of April 2020 (Week 3)
Part B Due Date 11:55 PM 8th of May 2020 (Week 7)
Submission Guidelines • All work must be submitted on Moodle by the due date along with a completed Assignment Cover Page.
• The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm margins on all four sides of your page with appropriate section headings.
• Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style.
Extension • If an extension of time to submit work is required, a Special Consideration Application must be submitted directly on AMS. You must submit this application three working days prior to the due date of the assignment.
Further information is available at:
http://www.mit.edu.au/about-mit/institute-publications/policiesprocedures-and-guidelines/specialconsiderationdeferment
Academic
Misconduct
• Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available at: http://www.mit.edu.au/about-mit/institute-publications/policiesprocedures-and-guidelines/Plagiarism-Academic-Misconduct-PolicyProcedure. For further information, please refer to the Academic Integrity Section in your Unit Description.
Dr Sadia Aziz Moderated by: Dr Nazmus Nafi
Assignment 1 Description
Business case study: Network design proposal for CASE.
Description
CASE (Centre for Advances Studies in Engineering) runs the largest postgraduate program in Korea. Its main campus sits on approximately four acres of land and serves over 400 students and 40 teachers. There are four departments (admin, HR, security, and Finance) in the Campus. The campus has three buildings. Two building are used for student’s classes and one building is for Administration having four departments. The administration building has four floors with each department on each floor.
With students needing Internet access for their education, the campus needed to build a wired network to give students more opportunities to access information online.
The university needs a comprehensive, technologically advanced Network solution that is cost effective and allow for network monitoring for this campus. The solution had to be easy to deploy and manage due to limited staff. The network need to cover the three main buildings. Client is also requesting wireless internet access at all buildings because a powerful wireless network would also allow staff, teachers and students to use their devices at campus. Moreover, the staff, students, and teachers each needed separate login credentials, to allow them different levels of Internet access.
(You will need to demonstrate your assignment during laboratory class).
Write a report with the following contents
• Executive Summary
• Network Topology
• Project hardware requirements o Name of the network device with manufacturer’s name, series, model and ports o Network topology o Type of the cables
o Name of the server, PC with specification such as operating system, RAM, hard disk etc.
• Network Design in Cisco Packet Tracer
• Network device configurations
a. Switch configuration:
o set hostname as your family name o set system clock to 29th April 2020 5:00pm o display the name of the file and version of IOS o display the name of the interfaces o display 6 IOS modes
b. Router configuration o set hostname as your family name o set system clock to 20th May 2020 4:45pm o Set encrypted password for console access o Configure the password for telnet access o Demonstrate connectivity between different departments
Marking criteria:
Submission One (Part A) – 5%:
Section to be included in the report Description of the section Marks
Executive Summary A technical and business summary to highlight your design to meet the business requirements in the case study. 3
Abstract Network Design Create a topology of the Network with all headings and justifications 6
Project hardware requirements a. Name of the network device with manufacturer’s name, series, model and ports
b. Type of the cables
c. Name of the server, PC with specification such as operating system, RAM, hard disk etc. 6
Submission Two (The Final Report – Part B) – 10%:
Section to be included in the report Description of the section Marks
Executive Summary Update your first submission by the lecturer’s feedbacks from your submission one 3
Project hardware requirements Update your first submission by the lecturer’s feedbacks from your submission one
a. Name of the network device with manufacturer’s name, series, model and ports
b. Type of the cables
c. Name of the server, PC with specification such as operating system, RAM, hard disk etc. 6
Network Design a. Use Cisco packet Tracer to generate network diagram.
(The design in cisco packet tracer must be created using the feedback on the topology) 10
Network device configurations - Switch configuration a.
b.
c.
d.
e. set hostname as your name set system clock to 29th April 2020 5:00pm display the name of the file and version of IOS display the name of the interfaces display 6 IOS modes 10
Network device configurations - Router configuration a.
b.
c.
d.
e. set hostname as your family name set system clock to 20th May 2020 4:45pm Set encrypted password for console access
Configure the password for telnet access Demonstrate connectivity between different departments 10
Demonstration Demonstrate switch and router configuration in week 7 laboratory class 6
Part A&B
Reference style Follow IEEE reference style 2+3
Total 50
Marking Rubric for Assignment #1: Total Marks 50
Grade Mark HD
40-50 DI 35-39 CR 30-34 P 25-29 Fail
25
Excellent Very Good Good Satisfactory Unsatisfactory
Part A:
Executive Summary Concise and specific to the project Topics are relevant and soundly analysed. Generally relevant and analysed. Some relevance and briefly presented. This is not relevant to the assignment topic.
Part A:
Abstract
Network Design Concise and specific to the project Generally specific to project Adequate relevance to given project Some relevance to given project Not relevant
Part A: Project hardware requirements Demonstrated
excellent ability
to think critically and sourced reference material appropriately Demonstrated excellent ability to think critically but did not source reference material appropriately Demonstrated ability to think
critically and sourced reference material appropriately Demonstrated ability to think critically and did not source reference material appropriately Did not demonstrate
ability to think critically and did not source reference material appropriately
Part B:
Network Design in Cisco Packet Tracer Logic is clear and easy to follow with strong arguments Consistency logical and convincing Mostly consistent logical and convincing Adequate cohesion and conviction Argument is confused and disjointed
Part B:
Network device configurations – Switch configuration All 5 Commands are clear with results. Most of Commands are clear with results. Some of
Commands are clear with results. Only few Commands are clear with results. No command is given.
Part B:
Network device
Configurations – Router configuration All 5 Commands are clear with results.. Most of
Commands are
clear with results. Some of
Commands are
clear with results. Only few
Commands are
clear with results. No command is given.
Part B:
Demonstration Logic is clear and easy to follow with strong arguments Consistency logical and convincing Mostly consistent logical and convincing Adequate cohesion and conviction Argument is confused and disjointed
IEEE Reference style Clear styles with excellent source of references. Clear referencing style Generally good Referencing
style Sometimes clear referencing style Lacks consistency with many errors